Go backALUthermo Thermal Reflective Insulation
Aluthermo Quattro® is the first thin, multi-reflector, multi-layer insulation system with all surfaces fully thermally welded together.
Aluthermo Quattro® consists of two 30-micron thick outer layers of polished and anti oxidation treated pure aluminium separated by two honeycombed layers of air bubbles enclosed inside a fire-retardant polyethylene film, together with two extra layers of pure aluminium foil and a fire-retardant and water-repellent polyethylene foam.
Aluthermo Quattro® provides an almost impenetrable barrier against infrared radiation in both summer and winter.
The air inside the bubble films and in the polyethylene foam is dry and stable. Any condensation is therefore prevented within the normal temperature ranges for Aluthermo Quattro® (see Applications and technical characteristics).
The obtained complex is semi-rigid and consists of the following successive layers:
- A layer of pure aluminium foil, 30 microns thick, treated against oxidation
- A layer of dry air bubbles enclosed in fire-retardant polyethylene
- A layer of pure aluminium foil treated against oxidation
- A fire-retardant and water-repellent polyethylene foam
- A layer of pure aluminium foil treated against oxidation
- A layer of dry air bubbles enclosed in fire-retardant polyethylene
- A layer of pure aluminium foil, 30 microns thick, treated against oxidation To make installation easier, all the bonding surfaces inside both Aluthermo® and Aluthermo Quattro® are thermally welded together.
To make installation easier, all the bonding surfaces inside both Aluthermo® and Aluthermo Quattro® are thermally welded together.
Roll Sizes:
1.2m x 25m (30 sq mtrs)
1.2m x 6.25m (7.5 sq mtrs)
Insulation Accessories:
Aluminium Reflective Tape
- Ref. Tape 100: Aluminium Foil Tape 100mm x 47.5m
- Ref. Tape 75: Aluminium Foil Tape 75mm x 47.5m
- Ref. Tape 50: Aluminium Foil Tape 50mm x 47.5m
Visit website
